Above Ground Model: Dolcevita

Elegance and Technology

The revolutionary technology of the Laghetto team responded with creative insight to the increasingly demand from a public more attentive to the image of Italian design for the garden furniture.

Dolcevita is presented in a collection of three different models: Diva, Rattan and Woody, in which the materials used are of the highest guaranteed quality .

Dolcevita pools are equipped with a state of the art recirculation and water filtration. Dolcevita system allows great versatility: it is assembled and disassembled in a short time and can be used even in areas where it is allowed only the use of temporary structures for seasonal use.

Dolcevita is a system that gives maximum freedom of choice, from aesthetics to the materials used, up to the type of installation.

Dolcevita is a Luigi Spedini Project

Structure

Stainless steel and hot-dip galvanized steel structure protected with epoxy powder (ZSV-TEC). Hardware of stainless steel with anti-grip nuts.

Finishes

INTERIOR: The pool membrane is made of polyesters fibers and high strength polymers for max durability. This super strong material is subsequently treated anti-UV, through the use of special additives which limit the aging of the material. The Dolcevita membrane is tensile strength of 430kg/5cm according to DIN 53354.
EXTERIOR: Hand woven wicker fabric or wood (woody) panels.
TOP EDGE: Hand woven wicker fabric or composite wood.

Standard Equipment

>Exclusive Laghetto filtration and treatment system
> Low energy Led Spotlights
> Ladder
> Vacuum cleaner Kit

Optional Equipment

> Special base frame for assembly directly on the ground without construction works
> Additional structural components for underground or terrace installation
> Stream swimming system
> Heat pump water heater
> Corner bench in solid surface with air whirlpool
> Winter and summer thermal top covers
> Automatic control system of the water level

Dolcevita is available in 8 standard sizes as listed in the Piscine Laghetto catalog (from the 2 × 4 up to the largest 5 × 10 meters) . The Dolcevita above ground structure allows also the construction of other full meters water mirror measures combinations (eg: 3 × 9 meters) or half a meter (eg: 3.5 × 7 meters), to allow the perfect fit to the space dedicated to your relaxation.

MOD. WATER SIZE (m.) OVERALL SIZE (m.) WATER HEIGHT (m.) VOLUME (mc.)
24 2 x 4 2,40 x 4,40 1,20 / 1,30 9,60
25 2 x 5 2,40 x 5,40 1,20 / 1,30 12,00
35 3 x 5 3,40 x 5,40 1,20 / 1,30 18,00
36 3 x 6 3,40 x 6,40 1,20 / 1,30 21,60
37 3 x 7 3,40 x 7,40 1,20 / 1,30 25,20
48 4 x 8 4,40 x 8,40 1,20 / 1,30 38,40
49 4 x 9 4,40 x 9,40 1,20 / 1,30 53,20
510 5 x 10 5,40 x 10,40 1,20 / 1,30 60,00

STRUCTURE

The Dolcevita aboveground structure is the lighter version of her older sister Dolcevita Inground, specially designed for installation above ground only. Even in this structure all the uprights, the side members and the bolts are made of hot galvanized steel and / or stainless steel.

FINISHES

The structure can be finished and covered with liner, wood grid panels and composite wood board, to create a pool of strong impact, well finished and incredibly convenient.

The Pool Liner used for Dolcevita Pool line are made of the an exclusive Trevira® coated membrane. This resilient material is subsequently treated anti-UV, anti-mold and anti-fungus through the use of special additives which limit material aging.

The Dolcevita above ground membrane has a tensile strength of 430 Kg / 5 cm, according to DIN 53354. Available colors are White, Beige, Blue, and Green.

Dolcevita above ground can be inserted in any context you like also avoiding the construction of a reinforced concrete slab using a special modular base frame made of powder-coated steel.
With this innovative and unique structural accessory, which can be accompanied by a mobility certificate and easy removal of the pool, you can install Dolcevita Pool in any type of situation, satisfying your every need, even the most special.

SPECIAL BASEMENTS

CLAY SOIL / NOT REPORTED

SOIL PREPARATION INSTRUCTIONS

> Remove at least 12 cm of soil for the maximum space of the structure + 60 cm
> Place 2 cm of sand and level the ground
> Unfold the geotextile (400 g / m2)
> Continue assembling the base and the structure of the pool
> Fill completely with sand before installing a bath

CLAY SOIL / NOT REPORTED

SOIL PREPARATION INSTRUCTIONS

> Remove at least 12 cm of soil for the maximum space of the structure + 60 cm
> Roll out the geotextile (400 gr / mq)
> Place 10 cm of gravel (10/30 mm size), roll it and level it
> Roll out the geotextile (400 gr / mq)
> Continue assembling the base and the structure of the pool
> Fill completely with sand before installing a bath

SANDY GRAVEL SOIL / NOT REPORTED

SOIL PREPARATION INSTRUCTIONS

> Remove at least 12 cm of soil for the maximum space of the structure + 60 cm
> Place 2 cm of sand and level the ground
> Roll out the geotextile (400 gr / mq)
> Continue assembling the base and the structure of the pool
> Fill completely with sand before installing the bath

SANDY GRAVEL SOIL / NOT REPORTED

SOIL PREPARATION INSTRUCTIONS

> Check that the quality of the soil sealing is good
> Remove at least 12 cm of soil for the maximum space of the structure + 60 cm
> Place 2 cm of sand and level the ground
> Roll out the geotextile (400 gr / mq)
> Continue assembling the base and the structure of the pool
> Fill completely with sand before installing a bath

ROCKY SOIL

SOIL PREPARATION INSTRUCTIONS

> Level out by removing any spikes and spurs of the rock
> Place 10 cm of sand containing it on the sides and level it
> Roll out the geotextile (400 gr / mq)
> Continue assembling the base and the structure of the pool
> Fill completely with sand before installing the bath